Leather Fastener Bags

5611 - Green Builder™ Fastener Bag

The best of both worlds! Light-weight hunter green all leather fastener bag! Offers side by side 35' tape holster and an upper bag; external sleeve pockets, drill bit holsters, angle square holster. Internal, 2003 - Oxy Tool Shield™(included). Main bag features reinforced back wall at stress points to insure years of durable wear.

Specifications:

* Pockets & Tool Holders: 10
* Weight: 2.1 lbs.
* Main Bag: 10"w x 9"d
* Outer Bag: 6.5" x 6"
* Upper Bag: 4.5" x 4"

Fastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat's paw, driver bits, angle square, etc.) and are worn on the left side of the body.

B5611 - Green Builder™ Fastener Bag - In Black

The best of both worlds! Light-weight classic black all leather fastener bag! Offers side by side 35' tape holster and an upper bag; external sleeve pockets, drill bit holsters, angle square holster. Internal, 2003 - Oxy Tool Shield™(included). Main bag features reinforced back wall at stress points to insure years of durable wear.

Specifications:

• Pockets & Tool Holders: 10
• Weight: 2.1 lbs.
• Main Bag: 10"w x 9"d
• Outer Bag: 6.5" x 6"
• Upper Bag: 4.5" x 4"
• Also available for left hand builders as B5611LH

Fastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat's paw, driver bits, angle square, etc.) and are worn on the left side of the body.

B5060 - Black Pro Fastener™ Bag

Our most popular leather fastener bag now available in black. Highly recommended for framing and general carpentry applications. Holders for 1” blade square, angle square, cat’s paw loop, driver bits, etc.

Specifications:

• Pockets & Tool Holders: 9
• Weight: 2.1 lbs.
• Main Bag: 9" x 8"
• Outer Bag: 7" x 6"
• Upper Bag: 4.5" x 4.5"
• Available for left handed builders in red leather as 5060LH

Fastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat's paw, driver bits, angle square, etc.) and are worn on the left side of the body.

Large, innovative, round bottom design provides room for tool holders and fasteners! Holders for tri-square, cat’s paw, driver bits, angle square, tape pocket fits up to a 35’ tape. Comes stock with the very best in protection for tools, bags, and body; the 2003 - Oxy Tool Shield™.

Specifications:

• Pockets & Tool Holders: 10
• Weight: 2.5 lbs.
• Main Bag: 11" x 9"
• Outer Bag: 8.5" x 6"
• Upper Bag: 4.5" x 4.5"
• Not available in left hand model.

Fastener Bags hold the tools and fasteners most often accessed with the left hand (nail sets, tri-square, cat's paw, driver bits, angle square, etc.) and are worn on the left side of the body.

Large, innovative, round bottom design provides room for tool holders and fasteners! Holders for torpedo level, pencils, utility knife, chisels, driver bits, etc. Comes stock with the 2003 - Oxy Tool Shield™.

Specifications:

• Pockets & Tool Holders: 16
• Weight: 2.4 lbs.
• Main Bag: 15" x 9"
• Outer Bag: 5" x 5.55 "
• Not available in left hand model.

Tool Bags hold the tools most often accessed with the right hand (hammer, pencils, utility knife, chisels, etc.) and are worn on the right side of the body.